1989-1998 Cummins 5.9L Fluidampr Harmonic Damper (960311)
- Overview
- Specs
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
| Bore Diameter | NA |
| Degree Marking Range | 2 notches for sensor pick up. |
| Degree Markings | No |
| Engine Balance | Internal |
| Finish | Black Zinc |
| Keyway | Drill pin kit #300002 recommended over 3500RPM |
| Length | 2.617" |
| Material | Steel |
| Mounting Hardware Included | Sensor Relocation Kit #300003 included. Recommend Fluidampr #300002 over 3,500rpm; #300007 up to 700hp / 1,250ft-lbs; #300008 above 700hp / 1,250ft-lbs. |
| Outside Diameter | 9-3/4" |
| Safety Rating | SFI 18.1 |
| Weight / Rotating Weight | 25.0 lbs / 16.7 lbs |
Shipping
Most orders are shipped 1-2 weekdays after an order is placed, depending on availability. Some products are shipped directly from manufacturers and may be subject to duty and taxes.
Availability
Not all products are stocked in house. Please check for availability as some products may be backordered.
