website
Skip to content

AEM Electronics Water/Methanol Injection Kit (30-3350/30-3351)


SKU 30-3350
Availability:
In stock
Availability:
In stock
Original price $648.53 CAD - Original price $827.93 CAD
Original price
$648.53 CAD
$648.53 CAD - $827.93 CAD
Current price $648.53 CAD
  • Overview
  • Features
  • Specs
  • Information

THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGE
Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water Injection Kits utilize robust hardware and deliver more advanced features than any other comparably priced water/methanol injection system.

 

Water/Methanol for All Boost Levels of Forced Induction Gas Race Engines
AEM offers two different water/methanol controller designs for gas vehicles:

One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.

The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.

 

Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND FLOW GAUGES SHOULD BE RUN WITH AN WMI INLINE FILTER (PN 30-3003). For additional insurance against unintended flow, particularly when the pump and tank must be installed higher than the injections nozzle, we recommend adding our optional High-Flow Low-Current WMI Solenoid (PN 30-3326).

Robust, Easy to Use Controller Designs
The new controller designs (Boost Dependent Kit PN 30-3300 & Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.

 

Innovative Injector Design Delivers Faster Cooling with Less Fluid Used
Our breakthrough injector design uses unique Swirl Generator Technology that improves atomization to deliver faster inlet temp cooling and uses less fluid to maintain inlet air cooling. We include three Swirl Generators that deliver 250cc, 500cc, and 1000cc of flow. The AEM V3 WMI injector is included in every AEM Water/Methanol injection kit and is a direct replacement/upgrade for the V2 injector in older systems (V3 Injector PN 30-3315).

In testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.

We then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.

Click the link for a Nozzle Flow Guide graph.


 


 


 


 



 

Heavy-Duty Waterproof High Pressure Injection Pump - Safe for Engine Bay/Frame Rail Mounting
AEM’s internally-bypassed water/methanol injection pump is waterproof and safe for mounting in loactions that are exposed the elements. It does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.


 

 

Low-Profile 1.15 Gallon Tank
AEM’s gas Water/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.

 

Simplified Wiring
AEM’s Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.

 

Integrated Boost Safe Feature
The controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems.

Revised Flow Control Strategy for More Linear Fluid Delivery
AEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.

  • Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid
  • “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
  • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
  • Precision-machined billet-aluminum injector with integral check valve
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
  • 1.15-gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
  • 20 feet of injection tubing included
  • LED dash light for system status and low fluid warning

Brand:

AEM Electronics

UPC:

840879022617

Water Injection Pump Included:

Yes

Wiring Harness Included:

Yes

Boost Pressure Reference Switch Included:

No

Reservoir Included:

Yes

Reservoir Volume:

1 gallon

Quantity:

Sold as a kit.

Boost dependent controller with on board 35PSI map sensor. All controllers feature turn resistant knobs, covered status light and test button, integrated fuse and plug to accept positive lock connector from wiring harness.

Boost dependent controller with on board 35PSI map sensor. All controllers feature turn resistant knobs, covered status light and test button, integrated fuse and plug to accept positive lock connector from wiring harness.

Multi-Input controller for MAF, IDC or external MAP sensor.

Multi-Input controller for MAF, IDC or external MAP sensor.

Remove the plug on the rear of the Multi-Input controller to access the programming dipswitches. A programming legend is provided for 05-v and frequency settings.

Remove the plug on the rear of the Multi-Input controller to access the programming dipswitches. A programming legend is provided for 05-v and frequency settings.

AEM's V3 WMI Injector features an innovative design that increases atomization for faster cooling using unique Swirl Generator technology, which also controls flow through a fixed injector orifice.

AEM's V3 WMI Injector features an innovative design that increases atomization for faster cooling using unique Swirl Generator technology, which also controls flow through a fixed injector orifice.

The AEM V3 WMI injector is included in every AEM Water/Methanol injection kit and is a direct replacement/upgrade for the V2 injector in older systems (V3 Injector PN 30-3315).

The AEM V3 WMI injector is included in every AEM Water/Methanol injection kit and is a direct replacement/upgrade for the V2 injector in older systems (V3 Injector PN 30-3315).

We simplified assembly and disassembly the V3 AEM WMI injector, with all components held in placeby a single clip at the rear of the injector body.

We simplified assembly and disassembly the V3 AEM WMI injector, with all components held in placeby a single clip at the rear of the injector body.

Unique Swirl Generator technology increases atomization for faster cooling.

Unique Swirl Generator technology increases atomization for faster cooling.

A self-cleaning umbrella valve helps prevent unintended flow and is self cleaning to help keep debris from passing through the injector.

A self-cleaning umbrella valve helps prevent unintended flow and is self cleaning to help keep debris from passing through the injector.

A mesh filter after the umbrella valve further prevents contaminants from entering an engine.

A mesh filter after the umbrella valve further prevents contaminants from entering an engine.

A positive lock connector with color coded wires eases installation, and mates securely to the plug on every AEM water/methanol controller.

A positive lock connector with color coded wires eases installation, and mates securely to the plug on every AEM water/methanol controller.

AEM's low-profile 1.15-gallon tank includes a more accurate conductive low fluid level sensor. The connector for the sensor is a positive lock design and the wires are color matched to the harness.

AEM's low-profile 1.15-gallon tank includes a more accurate conductive low fluid level sensor. The connector for the sensor is a positive lock design and the wires are color matched to the harness.

AEM's gasoline WMI tank has 15% more capacity than the previous design (1.15 gallons vs. old 1-gallon tank). It features and anti-starvation reservoir that collects fluid near the feed fitting at the bottom of the tank, and has relocated mounting holes that fit within the overall footprint of the tank.

AEM's gasoline WMI tank has 15% more capacity than the previous design (1.15 gallons vs. old 1-gallon tank). It features and anti-starvation reservoir that collects fluid near the feed fitting at the bottom of the tank, and has relocated mounting holes that fit within the overall footprint of the tank.
 

AEM’s internally-bypassed water/methanol injection pump provides quiet, smooth operation and features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent, reliable fluid delivery.

AEM’s internally-bypassed water/methanol injection pump provides quiet, smooth operation and features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent, reliable fluid delivery.

Compare horsepower on a turbocharged engine using pump gas, race gas and pump gas with AEM water/methanol injection!

Compare horsepower on a turbocharged engine using pump gas, race gas and pump gas with AEM water/methanol injection!

Compare torque on a turbocharged engine using pump gas, race gas and pump gas with AEM water/methanol injection!

Compare torque on a turbocharged engine using pump gas, race gas and pump gas with AEM water/methanol injection!

Shipping

Most orders are shipped 1-2 weekdays after an order is placed, depending on availability. Some products are shipped directly from manufacturers and may be subject to duty and taxes.

Availability

Not all products are stocked in house. Please check for availability as some products may be backordered.